LACE FRONT TAPE

Preparing for installation

1. Clean the hair system and bio hair with Bond Breaker shampoo and let dry.
2. Apply 99% alcohol to the scalp and the base of the system to prepare for optimal adhesion. Let evaporate completely.
3. Apply Max Hold Sport or Scalp Protector to the scalp to improve the tape's holding strength and protect against skin irritation.

Application (strips and contours)

1. Peel off the notched liner in the middle.
2. Place the adhesive side toward the hair system. Avoid touching the adhesive.
3. Place the tape contour where desired on the hair system. Repeat as needed.
4. When ready to apply to the scalp, peel off the remaining printed liner pieces. For easier application, spray Just-Rite positioning spray onto the adhesive area.
5. Press the hair system firmly onto the scalp, taking care not to shift it during the process.

Application (rolls)

1. Peel the adhesive tape off the roll and cut it to the desired length.
2. Place the adhesive side toward the hair system. Avoid touching the adhesive.
3. Place the piece of tape where desired on the hair system. Repeat as needed.
4. When ready to apply to the scalp, peel off the remaining white liner pieces. For easier application, spray Just-Rite positioning spray onto the adhesive area.
5. Press the hair system firmly onto the scalp for at least 10 seconds.

What's the difference between Lace Front tape and Lace Front Thin?

Both are made with the same remarkable qualities. But Lace Front Thin is thinner, giving a more natural-looking hairline.

Is Lace Front tape suitable for all hair system bases?

Yes! Lace Front tape can be used on all hair system bases, from lace to poly to mono.

What preparation is recommended for installing Lace Front tape?

Clean the scalp with Bond Breaker shampoo and apply 99% alcohol to remove dirt, oils and residue. Then use Max Hold Sport or Scalp Protector to boost holding strength and protect the skin before applying the tape.